Now, keep your hand free while taking calls with the Reconnect BTH BT-S-MIC Bluetooth Headset, Red. The sound is powerful and clear, you can switch easily from music to call. It features Lithium Ion (Li-Ion) battery with talktime of up to 8 hours.
Advertising
- Sound BTH‐300 in pairing mode so that it can be connected wirelessly to a MobilitySound Audio Adapter or cellular phone. CLOTHING CLIP The alligator‐type clip secures the MobilitySound BTH‐300 to the user’s clothing during use. The clip can be rotated to allow the mic to be better positioned.
- Manual; PRYME Radio Product PRYMEBLU BTH-600-ZD Manual. Reconnecting a Previously Paired Speaker Microphone and Phone. Once the speaker microphone and phone have been successfully paired together, both devices will. Microphone PRYME Radio Product PRYMEBLU BTH-300-KD User Manual.
16
NO LOW VOLTAGE (Figure 20)
24V AC LED Off https://shoesbrown551.weebly.com/blog/volvo-c70-manual-download.
24V AC LED Off https://shoesbrown551.weebly.com/blog/volvo-c70-manual-download.
NO LOW VOLTAGE, 24V AC LED Off
FIGURE 20
TEMPERATURE PROBE FAULT (Figure 21)
Water Temp LED Flashing
TEMPERATURE PROBE FAULT, Water Temp LED Flashing
FIGURE 21
This condition accommodates multiple failure modes. To more accurately
determine the cause of failure, press the pushbutton on the display board.
determine the cause of failure, press the pushbutton on the display board.
FAULT CONDITIONS
The controller is set up to provide additional status indicators under Fault
Conditons. The following figures are possible Fault Conditions.
Conditons. The following figures are possible Fault Conditions.
NO INCOMING LINE VOLTAGE (Figure 19) Line LED Off
Possible Cause
Remedy
1.
Burner ground wire broken
1. Check wire and connection
or corroded
at burner
2.
Connectors unplugged
2. Check connections
3.
Igniter broken
3. Replace igniter
4.
Flame probe faulty
Georgia dmv cdl manual download. 4. Replace flame probe
5.
Gas shut off
![Reconnect Bth Bt-s-mic User Manual Reconnect Bth Bt-s-mic User Manual](/uploads/1/3/3/4/133401409/610689521.jpg)
5. Turn on gas supply
6.
Clogged gas valve
https://shoesbrown551.weebly.com/blog/hp-laserjet-p4515x-printer-user-manual. 6. Replace gas valve
7.
Faulty gas valve
7. Replace gas valve
8.
Defective control
8. Replace control
9.
Burner improperly adjusted
9. Adjust burner
10.
Dirty burner
10. Clean burner
GAS VALVE LED FLASHING
This condition results from a failure to establish burner ignition after three
successive trials. In such cases:
successive trials. In such cases:
1. Investigate the possible cause and remedy any observations.
2. Momentarily depress the button on the display panel to reset the lockout
2. Momentarily depress the button on the display panel to reset the lockout
condition.
3. Confirm proper appliance operation.
NO INCOMING LINE VOLTAGE, Line LED Off
FIGURE 19
Possible Cause
Remedy
1. No Input Power
1. Apply Power
![Reconnect Bth Bt-s-mic User Manual Reconnect Bth Bt-s-mic User Manual](/uploads/1/3/3/4/133401409/833687963.jpeg)
2. Wiring Disconnected
2. Check all wiring
https://shoesbrown551.weebly.com/blog/subaru-2016-cross-treck-user-manual. 3. One or more wiring receptacles
3. Reconnect plugs on control,
disconnected from control
confirm all are fully seated
4. LED burned out
4. Ignore or replace control
Possible Cause
Remedy
1.Blower 24 VAC Fuse
1. Replace 24 VAC 3a Fuse
(Littlefuse 257003 automotive fuse).
2.Defective Transformer
2. Replace Transformer
3.LED burned out
3. Ignore or replace control
Advertising
Popular Brands
Reconnect Bth Bt-s-mic User Manual 2016
Popular manuals